ST-40 Blacksmith power hammer is designed for the forging of hot metal, Forging material should be full heated before forging, or it will greatly reduce the life of the hammer. The blacksmith air hammer has two cylinders: the compression cylinder and the working cylinder, by compressing the air and send it to the working cylinder, and pushes the hammer rod together with the hammer to hammer up and down.
The quality problem of the blacksmith air hammer seriously affects the normal operation of the forging industry and brings economic and human losses. After years of hard work, our company's technology research and development team has successfully tested in several forging factories. After years of testing and use, the new product is now available, and customers are welcome to contact us.
ST-40 air hammer is driven by a motor to make the compressed air drive the beating action, and the pedal-type control striking force is a high-efficiency forging device.
ST-40 air hammer bed frame is made of high quality castings, and the surface of the casting is heat treated for durability and no deformation. When customers purchase a single air hammer, often after decades of use, the equipment still maintains good performance.
The falling part of ST-40 air hammer is composed of a working piston, a hammer rod and an upper anvil. The hammer rod and the working piston are integrated. To make the weight conform to the technical specifications, the hollow rod can be made into a hollow piece, and the connection between the hammer rod and the hammer head can be made. It is connected by a dovetail groove and a wedge iron. The design of this structure is very clever, allowing users to flexibly match the workpiece according to the requirements of the process.
The mass of the air hammer anvil is 12-15 times the mass of the falling part, which can increase the stability of forging. The anvil is mounted on a sturdy reinforced concrete foundation with padding in order to eliminate vibrations from hammering.
Auto Spare Parts
|RATED WEIGHT OF TUP||40KG|
|NO OF BLOWS PER MIN||245|
|DISTANCE FROM HAMMER TO ROD||270MM|
|MAX SQUARE WORKED (M.S)||52MM×52MM|
|MAX DIA WORKED (M.S)||Φ68MM|
If you would like to get help immediately, PLS click the LIVE-CHAT, which is fixed on the right of browser. Meanwhile, you can also fill your requirements on the following form, we will contact you on the right time.