ST-25 Forging Power Hammer

ST-25 forging power hammer is a forging device with two cylinders integrated. The compression cylinder is located behind the equipment. It compresses the air and sends it to the working cylinder through the distribution valve. The working cylinder is located in front of the equipment. The hammer rod in the working cylinder drives the hammer head to hammer up and down. 
In order to provide customers with high-quality forging power hammer, after years of hard work and trials in several forging factories, our company's technology research and development team has finally developed a ST-25 forging power hammer that is well received by customers. Welcome customers to inquire.


Technical Advantages

Pneumatic control, Faster and more efficient operation

ST-25 forging power hammer is powered by compressed air and can meet the needs of safe production. The striking force and striking frequency can be controlled by adjusting the air pressure.

Cast iron frame, casting steel material is also available

ST-25 forging power hammer is made of cast iron. The material of the forging power hammer anvil can be cast steel according to customer requirements.

Simple mechanism, and long service life

ST-25 forging power hammer has a simple mechanism and is not easily damaged. The equipment is not only durable but also easy to maintain.

Whole integrated machine structure, start to work easily

ST-25 forging power hammer is designed with an all-in-one machine. Before the equipment leaves the factory, it is assembled and tested in the workshop. After receiving the equipment, the customer can connect it to the power supply and use it directly.

Application field

Knives Forging

Wrought Iron

Hardware Making

Auto Spare Parts

Agricultural Implements

Engineering Machinery

Machinery Repairs

Pipes Making

Jewelry Processing

Rigging Forging

Mining Machinery

Valve Making

Details show

The forging power hammer is driven by the motor through qty 3 off 'v' belts. By means of the crankshaft and connecting rod the pump piston is moved up and down in the compressing (pump) cylinder at the back of the hammer.By means of the air valves (controlled via hand and foot lever) the amount of air entering the ram cylinder can be controlled, allowing very light or heavy blows, or through practice a single blow can be delivered by a sharp 'tap' on the foot lever.At 'full work' the pump piston and ram piston are directly connected via the air passages, thus the ram reciprocates the motion of the pump piston. (hence flywheel speed = 250 rpm / no of blows = 250 min)

Case

Main specification

MODEL ST-25
RATED WEIGHT OF TUP 25KG
BLOW ENERGY 0.27KJ
NO OF BLOWS PER MIN 250
WORKING HEIGHT 240MM
DISTANCE FROM HAMMER TO ROD 235MM
MAX SQUARE WORKED (M.S) 40MM×40MM
MAX DIA WORKED (M.S) Φ48MM
MOTOR MODEL Y132S1-6
MOTOR POWER 3KW
TOTAL WEIGHT 1100KG
OVERALL LENGTH 1280MM
OVERALL WIDTH 720MM
OVERALL HEIGHT 1835MM

Recommended Products

Contact us

If you would like to get help immediately, PLS click the LIVE-CHAT, which is fixed on the right of browser. Meanwhile, you can also fill your requirements on the following form, we will contact you on the right time.